Continuous Casting Machine Spare
Ladle Slide Gate System
Mechanically Operated Slide Gate System
The Manual Slide Gate System is ideally designed for Ladle Sizes up to 10 Tons used in foundries as well as Steel Plants, The System allows easy Operation with the help of a long Lever giving tremendous mechanical advantage. The Curvilinear Motion is specially designed for Operation of the Lever reducing both the force to be applied as well as the refractory Cost.
The Manual Slide Gate System is designed for multiple openings required for foundry applications as well as pit-slide applications in the Ingots Casting Plants. This system can also be used for Continuous Casting Application where constant throughput is required through out the casting period.
Both the above applications are easily executed by choosing proper Refractory’s and by using appropriate Slide Gate Operation Technique.
Manual Slide Gate System has very few components, which can be easily assembled and dismantled jigs and Fixtures are eliminated thus avoiding the preparation time.
Since no Hydraulic Operations are required both the Capital Cost as well as Running Costs are substantially reduced.
Manual Slide Gate System is an ideal solution for small Steel Plants and the Foundries looking for inexpensive solutions for controlling the flow of Liquid Steel.
All parts are available Ex-Stock and Performance is Guaranteed backed by extensive service.
Hydraulic Operated Slide Gate
The Slide gate System is a prerequisite for Modern day refining and casting practices wherein temperatures normally shoot up suddenly and violent reaction take place within the ladle. A Slide Gate System for Bottom pouring ladles has inherent advantages over the conventional Stopper Road System. Benefits can be simply stated as lesser turnaround time, therefore lesser ladles, Higher temperatures of molten metal and longer casting times. lawatherm has been in the field of Slide Gates for several years now. We have rendered invaluable service to steel plants by way of solving problems and developing quality spare parts and systems, adapted to local conditions at affordable prices. Thus we are in a position to for see any problem in an existing system and suggest solutions for the same. Our constant striving to upgrade Systems and Services has ensured a quality product with numerous inherit advantages over products/systems based on Western Technology as well as tiny manual system.
flow full Cone Nozzels
Full Cone Nozzels has high precision and uniform liquid distribution circular area. This gives uniform liquid distribution throughout the entire circular impact area. This gives uniform liquid distribution throughout the entire circular impact area. The basic design of this nozzle is based on fundamental principal of axial swirling motion.
Lawatherm spraying nozzles also has another variety of full cone nozzles which is called spiral full cone nozzle. There is not any insert which gives clogging free nozzle & spiral impact throughout the entire circular area.
FULL CONE NOZZLE SPRAY CHARACTERISTICS
Applications
- Produces a full cone pattern
- Sprayed volume is evenly distributed across spray pattern
- Available with a range of spray angle.
Material and Condition
- Standard materials are Brass and Stainless Steel.
- Male and female thread available
- 3/8″ or 1/4″ BSP/NPT threaded connections available
- Specially designed internal core ensure good resistance to clogging
- Standard spray angle 45, 65, 80, 90, and other spray angle on request
Flat Jet Spray Nozzle
Lawatherm Flat Jet Nozzles ensures uniform, parabolic distribution of liquid. This flow geometry of nozzle produces compact and accurate jets with stable spary angle. These nozzles are suited for all universal application. These nozzles are not easily affected by pressure fluctuation. These nozzles are not prone to clogging.
Lawatherm Flat jet nozzles has simple and cost saving fixing attachments such as Easy Dovetail Guides.
Lawatherm Flat jet Nozzles are available with many flow rate sizes, Flat jet width, jet depth & also various spray angles to suit for various application.
Flat nozzle tips are usually mounted onto a pipe using a welded 3/8” nipple or a clamp and secured in place with a retaining nut. The precision machined orifices can be protected against the risk of clogging by using a filter which fits neatly into the nipples and clamps, specifically designed for this purpose.
Heat Expansion compensator assembly
Heat expansion compensator Disc Springs Eye Bolt are subdivided according to the different material, which are applicable to ultra-high temperature environment (up to 500°C), they are widely used in Heat Exchangers, Boilers, Furnaces & Ovens, Chemical Processing, etc.
Dummy Bar Pin Bolt Bush
We manufacture Dummy Bar with gun metal bushes. Dummy Bar is used to transfer the necessary pulling force to the slab, poured in the open when the seal from the mold following. And rely on the straightening machine will be cooled by the mold leads to the casting mold by the secondary cooling zone to enable the straightening machine to the continuous casting billet to the direction of the conveyor; Dummy Bar head from Dummy, and dummy transitional shaft is composed of three parts.
Hydraulic & Pneumatic Equipment
Cylinder & Seal
Lawatherm is one of the renowned suppliers of Hydraulic & Pneumatic Spares. We Provide Hydraulic Pump, Valve. Seal, Pipe, Cylinders, Power Rack, Automation Equipment and SPM.
Lawatherm holds in-depth stocks of a wide range of Hydraulic products including some of the best brands i.e, Dowty, Yuken, Polyhydron Jacktech, Suprimo, Rexroth, Vickers, Bosch are available with us in ready stock. We will give you the import substitute also in very competitive price.
We have a wide variety of Hydraulic Equipment, which have become benchmarks in the industry. Our quality controllers strictly check the range as per the standard quality parameters. We want to make sure that we can offer our clients highly efficient and durable range of hydraulic spares.
Application
- Entry
- Dummy Bar Receiver(DBR)
- Pusher
- Retractable dummy bar guide(RDBG)
- Exit
- Slide Gate Laddle
Rubber O-Rings Silicone
Silicone possess excellent resistance to temperature extremes. Silicone’s retention of properties at high temperatures is superior to other elastic materials. Silicone has poor tensile strength, tear resistance and abrasion resistance.
Lawatherm are the largest on-line distributor of O-rings in the india .In addition to O-rings in NBR and Viton sold online we are able to supply o rings in many other sizes and polymers including Silicone, EPDM, KALREZ® /FFKM on a short lead time.
We can usually supply many other non standard polymers like HNBR, PTFE, XNBR, PU, CR; hardness (40 to 90 ShA) and colours (blue, brown, grey, red, white, yellow, green) in about 4 working weeks (subject to minimum order charge).
Temprature Range
- Up to 200′ C (intermittant)
- Down to-60’C
Chemical Resistance
- Dry heat
- High aniline points oils
- Chlorinated DI-phenyls
- Food processing application
- Excellent ozone resistance
- Water (low temperature only)
Switch Mode Power Supply (SMPS)
A switched-mode power supply (switching-mode power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a source, like mains power, to a load, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Ideally, a switched-mode power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-to-off time. In contrast, a linear power supply regulates the output voltage by continually dissipating power in the pass transistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.
S8JC-ZS, newly released Power Supply with CE marking, additional models for economical Power Supply. S8JC-Z series.
S8JC-Z/SBJC-ZS is our best standard power supply for
- Material cost reduction
- Export machines, required safety standard
- Time saving for installation by DIN-rail mounting
Quick release couplings
High-quality quick-action coupling made of steel, stainless steel, brass or plastic for practically every application contingency
Very robust, rapid and secure coupling of practically all fluid media. Special solutions for your application needs can also be implemented upon request.
Variants:
Flat-sealing (leakage-free), cone-sealing or ball-sealing
with or without check valve
Plug-in or screw coupling
Bulkhead, pipe, hose or block integration
optional with dust cap, dust plug
optional with additional pressure relief (coupling under residual pressure)
Materials available for shipment:
Galvanised steel / zinc-nickel
Stainless steel 1.4571
Brass
Plastic
Air Spring Bellow
Ø 6 … 26 inch (152 … 660 mm)
> Almost frictionless operation
> No maintenance or lubrication
> High isolation level for vibration applications
> Very easy to install – no alignment problems
> Typical applications; actuator, air spring, or vibration isolation.
Technical features
Compressed air lubricated or unlubricated, Nitrogen, water (with glycol)
Operation :
Single acting
Operating pressure :
5,5 bar (79 psi) recommanded
dynamic pressure
8 bar (116 psi) maximum
Nominal diameters:
6, 8, 10, 12, 14 1/2, 16, 21, 26 inches
Strokes :
From 55 … 430 mm max., depending on diameters and number of convolutions
Operating temperature:
for M/31000 (Standard)
-30° … +50°C (-22° … +122°F)
-40° … +70°C (-40° … +158°F)
IR for TM/31000
-20° … +70°C (-4° … 158°F)
-25° … +90°C (-13° … 194°F)
ECO for EM/31000
+50° … +115°C (+122° … 239°F)
-20° … +130°C (-4° … +266°F)
The number represent the maximum permissible operating temperature. It is sutibel to operated with restriction at this temperature, the air bellow may have a reduced life time.
Materials :
End plates: steel, chromplated Studs: steel, zinc plated Central ring: aluminium or steel, chromplated, partly moulded in Bellow: M/31000, M/32000: NR/BR, SBR compound rubber TM/31000, TM/32000: IR EM/31000, EM/32000:ECO.
Rubber Bellow Expansio
Our domain expertise has enabled us to come up with an excellent collection of Rubber Bellow Expansion Bellow. All the offered bellows are designed in accordance with international quality standards, using quality stainless steel material and the latest technology. Our bellows can also be customized as per the specifications laid down by the p
Cooling Tower Equipment
COOLING TOWER SPARES
Cooling Tower can be used to reject heat from various sources such as machinery or heated process material. The primary use of large, industrial cooling towers is to remove the heat absorbed in the circulating cooling water systems used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semiconductor plants, crop drying, mines, foundries, steel plant, rolling mill, glass plant, power plant and other industrial facilities.
Water Softening Product
WATER SOFTENING PLANT SPARES
Water Softeners that are effective in reducing the hardness of the water. They help in producing zero soft water by highly acidic cation exchanger, which removes calcium and magnesium ions from the water. We design a series of softeners that have counter current regeneration with up flow rate and concurrent regeneration with down flow rate. These are capable of operating for longer periods at low costs and are suitable for medium scale industries, Steel plant and other commercial industries.
Continuous Casting Machine Spare
-
Ladle Slide Gate System
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.
-
Full Cone Nozzle Spray Characteristics
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.
-
Flat Jet Spray Nozzle
Lawatherm Flat Jet Nozzles ensures uniform, parabolic distribution of liquid. This flow geometry of nozzle produces compact and accurate jets with stable spary angle. These nozzles are suited for all universal application. These nozzles are not easily affected by pressure fluctuation. These nozzles are not prone to clogging. Lawatherm Flat jet nozzles has simple and cost saving fixing attachments such as Easy Dovetail Guides. Lawatherm Flat jet Nozzles are available with many flow rate sizes, Flat jet width, jet depth & also various spray angles to suit for various application Flat nozzle tips are usually mounted onto a pipe using a welded 3/8” nipple or a clamp and secured in place with a retaining nut. The precision machined orifices can be protected against the risk of clogging by using a filter which fits neatly into the nipples and clamps, specifically designed for this purpose.
-
Heat Expansion Compensator Assembly
Heat expansion compensator Disc Springs Eye Bolt are subdivided according to the different material, which are applicable to ultra-high temperature environment (up to 500°C), they are widely used in Heat Exchangers, Boilers, Furnaces & Ovens, Chemical Processing, etc
-
Dummy Bar Pin Bolt Bush
We manufacture Dummy Bar with gun metal bushes. Dummy Bar is used to transfer the necessary pulling force to the slab, poured in the open when the seal from the mold following. And rely on the straightening machine will be cooled by the mold leads to the casting mold by the secondary cooling zone to enable the straightening machine to the continuous casting billet to the direction of the conveyor; Dummy Bar head from Dummy, and dummy transitional shaft is composed of three parts.
-
Swicth Mode Power Supply (SMPS)
A switched-mode power supply (switching-mode power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a source, like mains power, to a load, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Ideally, a switched-mode power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-to-off time. In contrast, a linear power supply regulates the output voltage by continually dissipating power in the pass transistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.
-
Air Spring Bellow
> Ø 6 ... 26 inch (152 ... 660 mm)
> Almost frictionless operation
> No maintenance or lubrication
> High isolation level for vibration applications
> Very easy to install – no alignment problems
> Typical applications; actuator, air spring, or vibration isolation.
Technical features
Compressed air lubricated or unlubricated, Nitrogen, water (with glycol) Operation:
Single acting
Operating pressure:
5,5 bar (79 psi) recommanded
dynamic pressure
8 bar (116 psi) maximum
Nominal diameters:
6, 8, 10, 12, 14 1/2, 16, 21, 26 inches
Strokes:
From 55 ... 430 mm max., depending on diameters and number of convolutions
Operating temperature:
for M/31000 (Standard)
-30° ... +50°C (-22° ... +122°F)
-40° ... +70°C (-40° ... +158°F)
IR for TM/31000
-20° ... +70°C (-4° ... 158°F)
-25° ... +90°C (-13° ... 194°F)
ECO for EM/31000
+50° ... +115°C (+122° ... 239°F)
-20° ... +130°C (-4° ... +266°F)
The number represent the maximum permissible operating temperature. It is sutibel to operated with restriction at this temperature, the air bellow may have a reduced life time.
Materials:
End plates: steel, chromplated Studs: steel, zinc plated Central ring: aluminium or steel, chromplated, partly moulded in Bellow: M/31000, M/32000: NR/BR, SBR compound rubber TM/31000, TM/32000: IR EM/31000, EM/320 -
Rubber Bellow Expansion Joint
Joint Our domain expertise has enabled us to come up with an excellent collection of Rubber Bellow Expansion Bellow. All the offered bellows are designed in accordance with international quality standards, using quality stainless steel material and the latest technology. Our bellows can also be customized as per the specifications laid down by the patrons.
Hydraulic & Pnumatic Equipment
-
Full Cone Nozzle Spray Characteristics
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.
-
Rubber O-Rings Silicone
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.